93
The Belmont® buddy™2 is a close-to-the-patient blood and fluid warmer that instantly warms while safely removing air. The unit conveniently mounts on an IV pole, displays fluid temperature, and a...
58
The Belmont® buddy lite™ is a battery-powered blood and fluid warmer approved for flight and used globally in war zones, hospitals, ambulances, flightline helicopters, ski patrols, or anywhere warm...
31
The Belmont® buddy lite™ AC is an AC powered or battery-powered blood and fluid warmer used globally in war zones, hospitals, ambulances, flight line helicopters, ski patrols or anywhere warm blood...
39
The Belmont® Rapid Infuser RI-2 uses patented electromagnetic induction heating. This technology is credited with saving thousands of lives globally by infusing warm blood and fluid into patients e...
25
The Belmont® Hyperthermia Pump is used in therapeutic procedures to raise the temperature of the thoracic or peritoneal cavity to the desired target temperature by continuously lavaging the cavity ...
84
Consists of 3-bag spikes, 120 ml reservoir chamber with coarse filter, pump tubing, heat exchanger, pressure chamber with air debubbler, 54 inch patient line, interface to temperature and pressu...
89
The Belmont® 3.0 Liter Reservoir is designed to facilitate cases requiring large volumes of fluid. It can accommodate up to 5 infusion bags at one time.

Fluid enters the reservoi...
90
The standard patient line, on the 3-Spike Disposable Set, can be replaced with this Dual Patient Line allowing connection to two-patient delivery sites.
86
The standard patient line can be extended with this Patient Line Extension allowing a longer connection to a delivery site.
73
The Reservoir and Heat Exchanger set, consists of (4) Heat Exchangers with Patient Line and (4) 3.0 Liter Reservoirs. It is used for high volume cases where rapid fluid replacement is desired. C...
85
The disposable set features a large venting membrane which automatically vents out-gassed air during warming. This set also features a one-way valve to prevent backflow, a valve to prevent air entr...
91
The straight Inflow/Outflow Patient Line Kit is packaged and sterilized separately from the Heat Exchanger and the Reservoir. Connections between the Straight Inflow/Outflow Patient Line Kit, Heat...
92
The straight Inflow/Bifurcated Outflow Patient Line Kit is packaged and sterilized separately from the Heat Exchanger and the Reservoir. Connections between the Patient Line Kit, Heat Exchanger, a...
79
The Patient Line Kit is packaged and sterilized separately from the Heat Exchanger and the Reservoirs. Connections between the Patient Line Kit, Heat Exchanger, and the Reservoirs shall be made by...
88
The Procedure Pack Kit contains tubing sets providing two (2) inflows for Medtronic Sumps and two (2) outflows for SurgiMark Suction Sets, Viaguards. Two (2) fixed temperature probes are provid...
87
Cannula Connector, REF 902-00036, is pre-connected tubing sets to be used in conjunction with the Hyperthermia Pump Straight Inflow/Outflow Patient Line, REF 902-00010P and 902-00039P and the Hyper...